Wind Mill

Specifications :

• Model : SUDARSHAN- 2000
• Rated Output : 2000 watt
• Max Output : 2500 watt
• Generator : Permanent magnet generator
• Rated output voltage : 24 VDC
• Allocated battery : 12V 200AH, 4pcs
• Inverter : 240 VAC 1ph, charger True Sine Wave
• Startup wind speed : 2 m/s [7 KMPH]
• Cut-in wind speed : 3 m/s [11 KMPH]
• Rated wind speed : 9 m/s [32 KPMH]
• Security wind speed : 16 m/s [57 KMPH]
• Number of blade: 3
• Material of blade : FRP
• Blade Diameter : 2.7 m [19.7 Ft]
• Rated Rotating Speed : 657 RPM
• Wind Energy Transforming Rate : 0.40 Cp
• Tower height : 6m (19.7 Ft)
• Work temperature : -40degrees ~ +60degrees
• Blade material :GRPF (Glass reinforced plastic fibre)

How to choose Wind Mill location
At first, you should choose a wide and open extent land. The air should be enough to produce wind energy for Wind Mill working. For example: mountaintop, near river, a wide and open extent land, house top, etc.

Second you build it in 100 ft radius open area without high-rise construction nearby. If you have to build the Wind Mill near the high-rise construction, you need to increase your tower to be high. The very important is to make sure enough wind energy to provide the Wind Mill working. The Wind Mill Start-up Wind Speed is 2 m/s, Rated Wind Speed is 10m/s, The Wind generator can normal working so long as guaranteed the wind speed.

The Wind Mill should be installed in the place where plenty of wind is available without obstacles. You would better put the Wind Mill in the wind area, such as install it on the little mountain or in the valley flat place with high wind.

If the Wind Mill to be installed near the obstacles, the far the distance, the better they were, perhaps you need to increase your tower to be high (20 times distance of obstacle height).

Packing List 2KW

2000 W
Description	Quantity	Gross Weight	Packing Size	Packaged Form	Contents
Generator Box	1	52Kg	71.5*24*21	Laminated Wood	Hub
					Controller
					Tail Vane : 2
					Generator
					Nose Cone
					Users Manual
Blade Box	1	21Kg	160*24*21	Laminated Wood	Blades : 3
					Tail Rod : 1
Tower	1	71Kg	304*31.5*21	Covered with Braid	3m Tower : 2
					Circlewise anchor : 4
Accessory	1	33Kg	61*48.5*24.5	Laminated Wood	Tower Base
					L-anchor : 2
					Turnbuckle :4
					Flange bolts : 6
					Clamp : 8
					18m cable :1
					9m cable wire : 4
					16x50 Tower bolt :8
Sine wave inverter	1	23Kg	51*42*22	Laminated Wood	Sine wave inverter